Possible Solution: Remove the knob and spray compressed air around the control module. If this occurs, there may be debris in the mechanism. BMW issued service bulletin SI B65 03 19 in January 2019, which advised that “the iDrive controller knob sticks to the left after regular actuation.” The iDrive Knob Selects The Wrong ItemsĪnother possible problem is that the iDrive knob randomly selects some items at times and other items it won’t select. You should also be aware that iDrive Controller failure is a known fault in certain units which suffer an internal break. Here is a great video on iDrive Controller removal and repair. You don’t need to be an expert at soldering to complete this, but if you do not feel comfortable you can purchase a replacement iDrive Controller for under $200. Once you have the iDrive Controller removed, the most common issue is that the important connecting points need to be re-soldered. You will need a plastic pry tool, a rachet, and a set of small metric sockets. The good news here is that the iDrive Controller is straightforward to remove. Possible Solution: Remove the iDrive Controller and check for any damage to the motherboard. If the iDrive knob becomes sticky and difficult to turn, it may be because a sugary drink has been spilled on it or the connections on the iDrive motherboard are bad. The iDrive Knob Becomes Sticky Or Tough To Turn This is one of the most common issues with iDrive controllers, as by its very nature of being installed in the center of the vehicle it is vulnerable to all kinds of drinks and debris getting into the controller. The circular control device develops a fault.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |